However, with the right approach, you can easily overcome resistance. All you have to do is to use your mental resources efficiently. Just a little bit of the right mental effort can get you happily cranking on that horrendous task in just a few minutes.

As I’ve been experimenting with various productivity techniques over the last 7 years, I’ve discovered 3 extremely efficient techniques that I am using to this day. I am going to share these with you. I will also give you a fourth supporting technique, and show you how you can combine it all for maximum power.

1. Break it down

Break the dreaded task into the largest possible amount of sub-steps. Write it all down. Also write all related thoughts and notes that will occurr to you during this process.

After just 5-10 minutes, you can be a proud author of “How to do task X for dummies”. With such a how-to guide in hand, there will be little else to think about. You will just do it.

The magic of this approach is that the breakdown is an actual work on the task! Thanks to the breakdown process, you will think the task through and discover possible pitfalls. You will create a mental map of the unexplored scary territory which was causing the resistance.
This technique usually completely dissipates any resistance.

2. Discover the smallest possible next step you can do

Don’t confuse this with the “Next Action” principle from the Getting Things Done (GTD) methodology. Next Action in GTD is the next specific action you can take to move certain project forward. The problem is that this very action can be the one causing the resistance.

However, there is a simple algorithm which you can use to discover a next step that you will actually want to do, and feel no resistance to.

Let me give you an example from my own life. I am writing a book, and one day, it happens that I will feel enormous resistance to writing. However, with the following dialogue, I can go past the resistance and start writing in just a few moments.

It goes like this – this is the inner dialog I have with myself:

Q: Can I write a book right now?
A: No!

Q: Ok… how about a single chapter? Can I write a chapter?
A: No!

Q: Well how about just one page, can I write one page?
A: No.

Q: Well, can I at least open MS Word?
A: Yes, I can do that.

So now I have Word opened, and the process continues:

Q: Can I write something?
A: No.

Q: Can I read a few random paragraphs I’ve already written?
A: Yes, I can do that.

So I start reading, and sure enough, I will want to edit some of the things I wrote during the previous sessions. I edit them, and sure enough, before I know it, I am writing new text. Once I run out of things to write, I take a break, and then I continue the dialog with myself like this:

Q: Can I write some more?
A: No.

Q: How about some freewriting, writing completely random stuff at the end?
A: Yes, I can do that.

So I start writing random things at the end of the book, whatever is on my mind (Freewriting), clarifying my thoughts, playing with ideas – and sure enough, before I know it, I am yet again writing valuable new content for the book.

As you can see, I am always trying to find the smallest possible next step I can take. Sometimes, I do this dialogue on paper (or on a computer). You can experiment with that, too. This technique works like a charm. It is simple, yet powerful.

Once I discover the micro-step I am willing to do, and actually do it, I usually have no problem going forward with further action on the task. If it doesn’t help, I start looking for another micro-step I can take.

3. Set a time limit

Kitchen timer or any other kind of timer can be priceless. Pomodoro works great, but sometimes, even 20 minutes limit is too much to make us feel like doing something. So, why not try 5 minutes? Or 2 minutes? Still too much? How about 1 minute? Or 30 seconds. Seriously, why not?

Are you willing to work for 30 seconds on that terrible task? Yes? Great. Set the timer and… go! The rest will follow, starting is half the success. If not, do another time block, and gradually make them longer.

You can learn more about this in my previous post Overcome procrastination with new Swift To-Do List.

4. Discover the hidden cause of resistance and solve it

Sometimes, all you need is a few minutes of contemplating with a pen or a keyboard. Think about why you don’t want to do the task so much. If you can discover the hidden cause of the resistance, you can oftentimes easily solve it. The causes are usually very specific and individual. Try to look at it from multiple perspectives.

For example, you might not want to start with some big task because you are afraid that you will have no time for fun if you start working. So the solution could be to schedule some fun activity with friends for the evening, then happily get to work, knowing that the fun is already guaranteed.

The Now Habit is a wonderful book on procrastination. It explains all the possible causes of procrastination in detail, and it provides strategies to overcoming them.

It might be also helpful to remind yourself that you don’t have to do it. In life, everything is voluntary.

Combine the above

For maximum effect, you can combine all the techniques above:

1. Think about the reason you don’t want to do it, and if you discover the possible cause, try to solve it.
2. Break it down into a list of sub-steps (write your own “for dummies” how-to guide).
3. Discover the smallest micro-step you are willing to do
4. Start a timer and work on it for 2 minutes

Here is a final tip for you: When it comes to success in life, the speed of implementation is critical. You should use what you’ve just learned immediately, right now. Pick some task that you feel especially large resistance to, and engage it. Now you know how. Tomorrow, you probably won’t – unless you do this, right now. Get cranking.

PS: Download Swift To-Do List, a task and notes organizer for Windows which will amaze you. It’s just a few clicks away. Can these few clicks revolutionize the way you work?

- By Jiri Novotny+, the obsessed author of the number one to-do list software for Windows, Swift To-Do List. Jiri’s life quest is to become productivity and achievement world-class expert to empower others to achieve their full potential. If you liked this post, then definitely follow this blog on G+.

Related Posts:

• 10 best tricks of fooling myself to work
• Seriously, Stop Sabotaging Your 2023 Goals
• 3 easy techniques to instantly stop procrastinating
• Achieving Goals Like a Mad Klingon
• Create more productive environment at your desk (10 tips)
• Double your productivity, stop procrastinating and master your habits with new video training

How to Overcome Resistance to Work – 4 Techniques is a post from: Swift To-Do List Blog

UPDATE April 29, 2011: There is a new post Achieving Goals Like a Mad Klingon if you want to trick yourself into achieving goals.

In order to be successful, we have to work hard, no matter what. We can’t always be at the mercy of our motivation.

I am lazy. But that’s okay, because I have some tricks for fooling myself into working, every single day. Actually, I’m quite productive thanks to these tricks. I’m going to share the tricks with you now.

I will mention my own software, a task and notes organizer Swift To-Do List, in 2 of these tricks, but these tricks can be done with other programs (or pen and paper) too.

1. The ultimate trick

When I really don’t feel like working, and it would take a superhuman force to get me working, this saves me. Every time.

Actually, I think what follows is the best way of fooling yourself to work, because it works so well. It’s scary-effective.

So what’s the trick? Well, when I have a “Task X”, and I don’t feel like doing it, and I would much rather do anything else, but I know that doing this particular task is the best choice, I do this:

I tell myself that I will merely write down the steps needed to complete the task. Just a rough draft, at first, and that’s it. Maybe just 3 steps. I then add more steps, breaking the 3 steps into smaller sub-tasks. I then add some details, and thoughts, notes of things that I shouldn’t forget when doing this task. I just think the task through and write everything down. After a little while, I will be a proud author of “The Complete Guide To Finishing Task X for Dummies”.

(The actual way I do this is that I open my Swift To-Do List and fill the notes of the task I want to accomplish with all the steps and thoughts.)

Now, for some unknown reason, when there is nothing else to think about, and there is no way to screw this task up, because everything is laid out in front of me, I just start working on the task automatically. I might do just the first baby micro-step at first, but that’s OK. It follows to the next, and to the next, and before I know it, the task is finished.

When I am thinking about how to accomplish the task, I am already actually accomplishing it. And once I think it through, it seems ridiculously easy.

2. Not eating at the computer

I don’t know about you, but I have never accomplished *anything* while eating at my desk. I usually just read articles, or gaze at the code in Visual Studio while day-dreaming, at best. What’s worse, I even don’t enjoy the food that much this way, as my mind is split among 5 different things.

Oh, and did I mention that my keyboard used to be a huge mess? I swear that there was a delicate living ecosystem inside it. Even if I am really trying to be super-neat, some of the foodstuff will fall into the keyboard. It happens to the best of us.

So what I do now is that I always sit to an actual table, like a civilized man, and enjoy my meal without staring at the addictive hypnotic evils of my computer screen.

Now, while I am enjoying my food at the table, I also kinda miss the computer. I’m eager to return to it and do some real work. The fake feeling of productivity while eating at my computer is eliminated.

3. Rudder of the day

When I sit down to my computer for the first time in the morning, I immediately start working. Because my brain is still half asleep, he doesn’t fully realize that I’m actually working, so he won’t protest. Poor little bugger.

Whenever I begin the day this way, the whole day flows in the productive-tone. But if I start by messing around on the social networks and reading news and articles, the whole day seems lazy and I accomplish a lot less in the end.

This trick has probably the biggest ROI (return on investment) of all of these. What’s the investment? Well, it takes just a little spark of my willpower to start working in the morning. This little morning-spark can ignite an enormous day-fire of productivity.

Being the navigator behind the rudder is easy in the morning. Much harder during the day.

Whatever you do, start working when you sit at your computer for the first time. Even if just for a couple of minutes.

In my opinion, any work done “first thing in the morning” counts triple.

4. Real relaxation

Fake relaxation sucks. When I need a break, I do not eagerly launch Facebook, ICQ or solitaire, but I actually get up and get away from the computer! :-) I can go for a walk, read a book, prepare myself a fruit snack/smoothie/juice, take a nap, do some yoga, chat with a co-worker, or just generally chill out without looking at the darn computer screen.

When I return, I don’t do some random thing on “The Internets”. Oh no. I open my Swift To-Do List, see what’s next, and immediately start working.

5. “Back to work” mantra

I’ve learned this one from Brian Tracy’s Time Management and Maximum Achievement programs. I just keep saying “back to work”, whenever appropriate, until it starts humming in my mind automatically whenever something distracts me.

Completed a small task? “Back to work.” Someone interrupted me? “Back to work.” Answered a call? “Back to work.” Had to reboot my computer? “Back to work.” Velociraptor looking at me behind the window, then leaving? “Back to work.”

“Back to work” is my Answer to Life, the Universe, and Everything. I just feel great every time I tell myself “Back to work” and resume working.

6. Always knowing what to do next

Whenever I finish a task of any size, and I do not know what to do next, my productivity goes to the drain. So, I’ve come up with an easy way how to avoid this.

Whenever I need to know what to do next, I just bring Swift To-Do List up using a system-wide hotkey and I immediately see what’s next.

Not having some productivity software associated to a system-wide hotkey is like riding without a steering wheel. You will get somewhere, but not where you want to go.

I have many separate to-do lists (a couple for each project), and I’ve created a new Priority called “Next”, highlighted by a bright green color. I assign this priority to tasks that I want to accomplish next.

View modes, filters, sorting etc make this really easy. I can also manually reorder the tasks (see a video) to decide the exact order of my tasks.

7. Sheet of paper with the most important task

Although Swift To-Do List is awesome ;-), good old physical paper has an intricate quality that no software can offer: It exists outside of your computer.

When I have 1-3 super-important tasks, I often write them down on an actual physical paper, and put the paper in front of me. It will be a constant physical reminder of what I want to do. Works like a charm.

And don’t forget the exquisite pleasure of physically checking the tasks off, and joyously manufacturing a paper-ball as a token of your greatness.

This has the biggest effect when you prepare such a paper before leaving work or going to bed, because it will be the first thing you see when you get back to work the next day.

8. Eliminating distractions

It’s a fact of this age that focusing is nearly impossible if you do not have some personal distraction-management strategy. I’ve ellaborated on this topic in one of my previous posts Create more productive environment at your desk (10 tips).

9. When falling asleep…

When you are falling asleep, think about the most important task for the next day. Your subconscious mind will do half the job for you during the night.

This might sound bananas to you, but I swear that it works. Your mind is busy during the whole night anyway (we all have dreams), so why not give it something productive to ponder on?

What’s your trick?

I lied. There are only 9 tricks. However, here is the Captain You to save the day!

See that comment box below? I would love to hear your tricks of fooling yourself to work, or any other comments.

Bring it on. How do you fool yourself into work?

Related Posts:

• How to Overcome Resistance to Work – 4 Techniques
• Seriously, Stop Sabotaging Your 2023 Goals
• Achieving Goals Like a Mad Klingon
• Hidden Procrastination
• Double your productivity, stop procrastinating and master your habits with new video training
• 3 easy techniques to instantly stop procrastinating

10 best tricks of fooling myself to work is a post from: Swift To-Do List Blog

However, prevention of these issues (called RSI) is fairly simple – take short breaks every 30-60 minutes, and a longer break every few hours. Walk around, stretch, do some jumping jacks or ride a horse (if you live on a farm :-)). You should also look into a distance (eg. from a window) to help your eyes.

The problem is to remember to take these breaks

That’s the real issue here! It is nearly impossible to remember on your own to take these breaks. In fact, sitting at your computer can put you in a light state of trance. You need reminders to prevent RSI.

There are some specialized RSI prevention software products designed to prevent RSI. They periodically remind you to get up and move around a bit, but I consider these solutions to be an overkill.

How to prevent RSI with reminders – the simple solution

Our to-do list program supports recurring reminders. The reminders can repeat in longer (e.g. daily/weekly) or shorter periods (e.g. every 30 minutes) – you can set any interval you want.

If you create a task and set it to “recur hourly” with a reminder, Swift To-Do List will periodically remind you of this task in the specified time intervals. One of the benefits of this method is that when you restart your computer or the program, the timer will also reset, and you will be reminded after your set time interval passes after the new start.

Simply create a new task, call it something like “Take a short break“, go to the Recurrence tab, select the “Recur hourly” frequency and the “Just remind me” action. And that’s it!

I also have one great tip for you:

Place ideas what you might do on your short break into task notes. The reminder window will then always display these notes to inspire you!

Some ideas to get you started:

• Drink some water
• Stretch or do a few yoga poses
• Eat a piece of fruit
• Do a few push-ups or sit-ups
• Look out from a window
• Jump – hey, it’s fun! Just don’t jump out of that window!
• Take your favorite neuro-stimulant formula (eg. tea or coffee)
• Self-massage
• Juggle anything (eg. wireless devices)
• Take a few really deep breaths
• Close your eyes and softly massage them
• Do a short meditation. Say something positive to yourself.

This is how the reminder window can look like:

Yoga is really great if you are alone or don’t mind others. Just search YouTube for “yoga poses for beginners” or something similar to get quick inspiration and instructions. These will really stretch you out!

Related Posts:

• How to change the default reminder time
• Seriously, Stop Sabotaging Your 2023 Goals
• How to Overcome Resistance to Work – 4 Techniques
• 10 best tricks of fooling myself to work
• What’s new in 7.20: Email reminders, hourly recurrence, Task ID column and more!

How to prevent repetitive strain injury with reminders is a post from: Swift To-Do List Blog